Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

uPVC windows · Kent

Triple glazed uPVC windows in Rochester

Triple glazed uPVC windows for homes in Rochester: measured on a free survey, made to order and fitted by installation teams working for us across Kent.

ME1Postcode district
1.4U-value limit, England (W/m²K)
7h 50mDaylight, 21 Dec
15°Midday sun, 21 Dec
White uPVC casement windows on a 1930s red-brick semi-detached house

uPVC frames give the best heat-loss figure for the money, in white or woodgrain. Triple glazed uPVC windows are plastic-framed windows fitted with a sealed unit of three glass panes and two gas-filled cavities.

Winter light and glass choice in Rochester

On the shortest day, Rochester gets about 7 h 50 min of daylight and the midday sun reaches only about 15° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.

Guide prices in Rochester

GuideSupply and fit, inc VAT
Small window
about 600 x 1000 mm (bathroom, landing)
£695 – £845
Medium window
about 1200 x 1200 mm (bedroom)
£895 – £1,095
Large window
about 1800 x 1200 mm (lounge)
£1,395 – £1,695

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for uPVC windows in England

The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Planning: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Rochester

Will triple glazed uPVC windows look bulky?

The frames look much the same as good double glazed uPVC. The glass unit is thicker, but that sits inside the frame, so from outside the difference is hard to spot.

Do I need trickle vents?

In England and Wales, if your old windows had trickle vents, the new ones must have vents at least as big, and if they did not, the room must be no less ventilated than before. Scotland and Northern Ireland also require that replacement windows do not make ventilation worse. We size vents on the survey.

Do you fit triple glazed uPVC windows in Rochester?

Yes. We arrange surveys and fitting in Rochester and across Kent. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

How long does it take to get triple glazed uPVC windows fitted in Rochester?

After the survey, typical manufacture time is 4 to 6 weeks, and most homes are fitted in 1 to 4 days.

Nearby

Also near Rochester: Chatham (2 km), Strood (2 km), Gillingham (3 km) and Gravesend (11 km).

Other products in Rochester

uPVC windows in Rochester: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote