Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Flush casement windows · Kent

Triple glazed flush casement windows in Rochester

If you live in Rochester (ME1) and want triple glazed flush casement windows, start with a free survey: every opening measured, then a written quote that fixes the price.

ME1Postcode district
1.4U-value limit, England (W/m²K)
7h 50mDaylight, 21 Dec
15°Midday sun, 21 Dec
Sage green flush casement windows on a whitewashed English cottage

A softer, flatter face for cottages and older homes. A flush casement window has sashes that close flush with the outer frame instead of overlapping it, copying the look of traditional timber windows.

Winter light and glass choice in Rochester

Winter days in Rochester are short: about 7 h 50 min of daylight on 21 December, with the sun peaking near 15°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Rochester

GuideSupply and fit, inc VAT
Small window
about 600 x 1000 mm (bathroom, landing)
£845 – £1,095
Medium window
about 1200 x 1200 mm (bedroom)
£1,195 – £1,495
Large window
about 1800 x 1200 mm (lounge)
£1,795 – £2,195

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for flush casement windows in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Planning: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

You will know exactly what you are buying: the quote states the unit build-up, frame, finish, fitting work and how Building Regulations compliance is handled. On fitting day each opening is replaced and closed up before the team moves on.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Rochester

Are flush casements more expensive?

Yes. Our guide puts them about 30% above a standard uPVC casement of the same size.

Will they be accepted in a conservation area?

Flush designs are often the closest match to original timber windows, but each council decides. See our conservation guide and check any Article 4 direction.

Do I need permission for triple glazed flush casement windows in Rochester?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Do you fit triple glazed flush casement windows in Rochester?

Yes. We arrange surveys and fitting in Rochester and across Kent. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

Nearby

We also cover nearby Chatham (2 km), Strood (2 km), Gillingham (3 km) and Gravesend (11 km).

Other products in Rochester

Flush casement windows in Rochester: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote