Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Essex

Passivhaus and EnerPHit windows in Grays

From the first measure to the handover pack, we handle Passivhaus and EnerPHit windows for homes in Grays and the rest of Essex.

RM17Postcode district
1.4U-value limit, England (W/m²K)
7h 50mDaylight, 21 Dec
15°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Low-energy triple glazed windows installed to your designer’s details. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Grays

In Grays, midday sun in late December sits around 15° high, with roughly 7 h 50 min of daylight. For windows facing north or shaded by neighbours, cutting heat loss matters more than solar gain; on open south-facing glass, ask about a higher solar-gain unit.

Guide prices in Grays

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

The surveyor measures every opening, checks ventilation, escape windows and safety-glass zones, and talks through styles. Your written quote lists each item with its glass build-up and U-value, and the price is fixed for that specification.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Grays

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

Do you fit Passivhaus and EnerPHit windows in Grays?

Yes. We arrange surveys and fitting in Grays and across Essex. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

Do I need permission for Passivhaus and EnerPHit windows in Grays?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Nearby

We also cover nearby South Ockendon (5 km), Gravesend (5 km), Dartford (8 km) and Stanford-le-Hope (9 km).

Other products in Grays

Passivhaus and EnerPHit in Grays: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote