Passivhaus and EnerPHit · Kent
Passivhaus and EnerPHit windows in Dartford
Homes in Dartford can have Passivhaus and EnerPHit windows supplied and fitted, with surveys arranged across Kent including DA1.
Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.
Winter light and glass choice in Dartford
In Dartford, midday sun in late December sits around 15° high, with roughly 7 h 50 min of daylight. For windows facing north or shaded by neighbours, cutting heat loss matters more than solar gain; on open south-facing glass, ask about a higher solar-gain unit.
Guide prices in Dartford
| Guide | Supply and fit, inc VAT |
|---|---|
| uPVC low-energy window medium, deep frame, Uw about 0.8 or better | £1,395 – £1,795 |
| Timber low-energy window medium, thermally broken | £2,395 – £2,995 |
| Alu-clad timber low-energy window medium, certified-component systems on request | £2,695 – £3,395 |
Guide prices. Your written quote after the free survey fixes the price for the specification shown.
Rules for Passivhaus and EnerPHit in England
The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.
Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.
How it works
We start with a survey, not a sales pitch: measurements, the structure above any bays, trickle-vent needs and escape windows. The quote that follows fixes the price, and anything unexpected on the day is agreed with you first.
- Every opening measured, including escape and vent needs
- Frames rated for the weight of triple glass
- Old windows removed and taken away
- Each opening closed up the same day
Questions from Dartford
What is EnerPHit?
The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.
Is triple glazing enough for Passivhaus?
Triple glass is the starting point. The frame, spacers and installation all have to perform too.
Do you fit Passivhaus and EnerPHit windows in Dartford?
Yes. We arrange surveys and fitting in Dartford and across Kent. Send your postcode and the windows or doors you want replaced, and we will book a free survey.
How long does it take to get Passivhaus and EnerPHit windows fitted in Dartford?
After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.
Nearby
We also cover nearby Bexley (5 km), Swanley (6 km), Welling (8 km) and South Ockendon (8 km).
Other products in Dartford
- uPVC windows
- Aluminium windows
- Timber windows
- Alu-clad timber windows
- Casement windows
- Flush casement windows
- Tilt and turn windows
- Sash windows
- Bay and bow windows
- Fixed and picture windows
- Composite front doors
- French doors
- Sliding patio doors
- Bifold doors
- Glass-only replacement
- Acoustic triple glazing
- Security glazing
- Whole-house replacement
- New builds and self-builds
- Period homes and conservation areas
- Flats and apartments
Passivhaus and EnerPHit in Dartford: book your free survey
Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.