Passivhaus and EnerPHit · East Sussex
Passivhaus and EnerPHit windows in Seaford
If you live in Seaford (BN25) and want Passivhaus and EnerPHit windows, start with a free survey: every opening measured, then a written quote that fixes the price.
Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.
Winter light and glass choice in Seaford
In Seaford, midday sun in late December sits around 16° high, with roughly 7 h 57 min of daylight. For windows facing north or shaded by neighbours, cutting heat loss matters more than solar gain; on open south-facing glass, ask about a higher solar-gain unit.
Guide prices in Seaford
| Guide | Supply and fit, inc VAT |
|---|---|
| uPVC low-energy window medium, deep frame, Uw about 0.8 or better | £1,395 – £1,795 |
| Timber low-energy window medium, thermally broken | £2,395 – £2,995 |
| Alu-clad timber low-energy window medium, certified-component systems on request | £2,695 – £3,395 |
Guide prices. Your written quote after the free survey fixes the price for the specification shown.
Rules for Passivhaus and EnerPHit in England
The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.
Planning: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.
How it works
You will know exactly what you are buying: the quote states the unit build-up, frame, finish, fitting work and how Building Regulations compliance is handled. On fitting day each opening is replaced and closed up before the team moves on.
- Guide prices published, not hidden
- No pressure: the quote is yours to keep
- Frames, glass and fitting in one contract
- Advice on planning and consents before you order
Questions from Seaford
Is triple glazing enough for Passivhaus?
Triple glass is the starting point. The frame, spacers and installation all have to perform too.
Do Passivhaus windows have to be certified?
Not always, but certified components make the certification process simpler. Ask and we will price certified systems.
Do I need permission for Passivhaus and EnerPHit windows in Seaford?
In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.
How long does it take to get Passivhaus and EnerPHit windows fitted in Seaford?
After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.
Nearby
Also near Seaford: Rottingdean (12 km), Eastbourne (13 km), Hailsham (15 km) and Brighton (18 km).
Other products in Seaford
- uPVC windows
- Aluminium windows
- Timber windows
- Alu-clad timber windows
- Casement windows
- Flush casement windows
- Tilt and turn windows
- Sash windows
- Bay and bow windows
- Fixed and picture windows
- Composite front doors
- French doors
- Sliding patio doors
- Bifold doors
- Glass-only replacement
- Acoustic triple glazing
- Security glazing
- Whole-house replacement
- New builds and self-builds
- Period homes and conservation areas
- Flats and apartments
Passivhaus and EnerPHit in Seaford: book your free survey
Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.