Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · East Sussex

Passivhaus and EnerPHit windows in Brighton

From the first measure to the handover pack, we handle Passivhaus and EnerPHit windows for homes in Brighton and the rest of East Sussex.

BN2Postcode district
1.4U-value limit, England (W/m²K)
7h 56mDaylight, 21 Dec
16°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Low-energy triple glazed windows installed to your designer’s details. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Brighton

On the shortest day, Brighton gets about 7 h 56 min of daylight and the midday sun reaches only about 16° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.

Guide prices in Brighton

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

We start with a survey, not a sales pitch: measurements, the structure above any bays, trickle-vent needs and escape windows. The quote that follows fixes the price, and anything unexpected on the day is agreed with you first.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Brighton

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

How long does it take to get Passivhaus and EnerPHit windows fitted in Brighton?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Do I need permission for Passivhaus and EnerPHit windows in Brighton?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Nearby

Also near Brighton: Hove (2 km), Portslade (6 km), Rottingdean (6 km) and Burgess Hill (14 km).

Other products in Brighton

Passivhaus and EnerPHit in Brighton: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote