Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Scotland

Passivhaus and EnerPHit windows in Aberdeen and Aberdeenshire

We survey and fit Passivhaus and EnerPHit windows across Aberdeen and Aberdeenshire, from Aberdeen and Peterhead to smaller towns such as Ellon.

6Towns with local pages
ScotlandRules applied
1.6U-value limit (W/m²K)
8 to 14 weeksTypical lead time
Timber-clad low-energy house with deep-set windows and external shading

Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Guide prices across Aberdeen and Aberdeenshire

uPVC low-energy window

medium, deep frame, Uw about 0.8 or better

£1,395 – £1,795inc VAT · £1,160 – £1,495 ex VAT

  • Deep multi-chamber frame
  • Airtightness tapes and insulated fixing
  • Installation details recorded
Typical project

Timber low-energy window

medium, thermally broken

£2,395 – £2,995inc VAT · £1,995 – £2,495 ex VAT

  • Engineered timber, deep section
  • Airtightness tapes and insulated fixing
  • Installation details recorded

Alu-clad timber low-energy window

medium, certified-component systems on request

£2,695 – £3,395inc VAT · £2,245 – £2,830 ex VAT

  • Timber inside, aluminium outside
  • Airtightness tapes and insulated fixing
  • Installation details recorded

Guide prices, supply and fit. The written quote after your survey fixes the price for the specification shown; anything extra is agreed with you first.

Towns in Aberdeen and Aberdeenshire

Rules in Scotland

Scotland requires replacement windows to achieve 1.6 W/m²K, which good triple glazing passes comfortably. Replacing a window or door, frame and all, does not need a building warrant, but the work must still meet the building standards.

Planning: Since May 2024, replacement windows on houses are widely permitted development, including in many conservation areas, with front elevations expected to match the existing closely; your council tells you if prior notification applies. Flats outside conservation areas generally need permission only if the opening size changes. Listed buildings need listed building consent.

How it works

We start with a survey, not a sales pitch: measurements, the structure above any bays, trickle-vent needs and escape windows. The quote that follows fixes the price, and anything unexpected on the day is agreed with you first.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

Do you cover all of Aberdeen and Aberdeenshire?

We arrange surveys and fitting across Aberdeen and Aberdeenshire.

Do I need permission for Passivhaus and EnerPHit windows in Scotland?

In Scotland, replacement windows on houses are widely permitted development since May 2024, with front elevations expected to match closely; listed buildings need consent.

Passivhaus and EnerPHit in nearby areas of Scotland

Other products in Aberdeen and Aberdeenshire

Passivhaus and EnerPHit across Aberdeen and Aberdeenshire

Written quote fixed for the specification, after a free survey. No building warrant is needed for a straight replacement in Scotland; we fit to the building standards and give you a written handover pack.

CallGet a quote