Glass-only replacement · Kent
Triple glazed sealed unit replacement in Margate
Triple glazed replacement sealed units for homes in Margate: measured on a free survey, made to order and fitted by installation teams working for us across Kent.
Failed and misted units replaced, with frames checked first. Sealed unit replacement means changing only the glass in an existing frame.
Winter light and glass choice in Margate
On the shortest day, Margate gets about 7 h 51 min of daylight and the midday sun reaches only about 15° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.
Guide prices in Margate
| Guide | Supply and fit, inc VAT |
|---|---|
| Small unit up to about 0.6 m2, frame checked first | £145 – £195 |
| Medium unit about 0.6 to 1.2 m2 | £195 – £245 |
| Large unit about 1.2 to 2 m2 | £295 – £395 |
Guide prices. Your written quote after the free survey fixes the price for the specification shown.
Rules for glass-only replacement in England
The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.
Planning: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.
How it works
The surveyor measures every opening, checks ventilation, escape windows and safety-glass zones, and talks through styles. Your written quote lists each item with its glass build-up and U-value, and the price is fixed for that specification.
- Free survey and a written quote fixed for the specification
- Glass build-up and whole-window U-value on every quote
- Written handover pack at the end of the job
- Guarantees on frames, units and fitting in writing
Questions from Margate
Why are my windows misting between the panes?
The seal around the unit has failed and moist air has got in. Only replacing the unit fixes it.
Can I put triple glazing in my existing windows?
Usually not in a way that helps. Most frames take up to about 28 mm units; a triple unit that thin performs about the same as, or worse than, good double glazing. We check your frames before recommending anything.
Do you fit triple glazed replacement sealed units in Margate?
Yes. We arrange surveys and fitting in Margate and across Kent. Send your postcode and the windows or doors you want replaced, and we will book a free survey.
How long does it take to get triple glazed replacement sealed units fitted in Margate?
After the survey, typical manufacture time is 1 to 2 weeks for units, and replacing the units usually takes a few hours to a day.
Nearby
Also near Margate: Broadstairs (5 km), Ramsgate (6 km), Deal (18 km) and Herne Bay (18 km).
Other products in Margate
- uPVC windows
- Aluminium windows
- Timber windows
- Alu-clad timber windows
- Casement windows
- Flush casement windows
- Tilt and turn windows
- Sash windows
- Bay and bow windows
- Fixed and picture windows
- Composite front doors
- French doors
- Sliding patio doors
- Bifold doors
- Acoustic triple glazing
- Security glazing
- Whole-house replacement
- New builds and self-builds
- Period homes and conservation areas
- Flats and apartments
- Passivhaus and EnerPHit
Glass-only replacement in Margate: book your free survey
Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.