Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Surrey

Passivhaus and EnerPHit windows in Camberley

We arrange surveys and fitting of Passivhaus and EnerPHit windows in Camberley and the GU15 area, with a written, fixed quote after a free survey.

GU15Postcode district
1.4U-value limit, England (W/m²K)
7h 51mDaylight, 21 Dec
15°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Camberley

Winter days in Camberley are short: about 7 h 51 min of daylight on 21 December, with the sun peaking near 15°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Camberley

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

England requires replacement windows to achieve 1.4 W/m²K, or a Window Energy Rating of band B or better, which good triple glazing passes comfortably. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Camberley

Do Passivhaus windows have to be certified?

Not always, but certified components make the certification process simpler. Ask and we will price certified systems.

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

Do I need permission for Passivhaus and EnerPHit windows in Camberley?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

How long does it take to get Passivhaus and EnerPHit windows fitted in Camberley?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Nearby

We also cover nearby Sandhurst (3 km), Farnborough (5 km), Crowthorne (5 km) and Yateley (6 km).

Other products in Camberley

Passivhaus and EnerPHit in Camberley: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote