Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Staffordshire

Passivhaus and EnerPHit windows in Cannock

If you live in Cannock (WS11) and want Passivhaus and EnerPHit windows, start with a free survey: every opening measured, then a written quote that fixes the price.

WS11Postcode district
1.4U-value limit, England (W/m²K)
7h 37mDaylight, 21 Dec
14°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

The windows and installation detail low-energy builds depend on. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Cannock

Winter days in Cannock are short: about 7 h 37 min of daylight on 21 December, with the sun peaking near 14°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Cannock

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

We start with a survey, not a sales pitch: measurements, the structure above any bays, trickle-vent needs and escape windows. The quote that follows fixes the price, and anything unexpected on the day is agreed with you first.

  • Every opening measured, including escape and vent needs
  • Frames rated for the weight of triple glass
  • Old windows removed and taken away
  • Each opening closed up the same day

Questions from Cannock

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

Do you fit Passivhaus and EnerPHit windows in Cannock?

Yes. We arrange surveys and fitting in Cannock and across Staffordshire. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

Do I need permission for Passivhaus and EnerPHit windows in Cannock?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Nearby

We also cover nearby Burntwood (7 km), Bloxwich (8 km), Rugeley (10 km) and Wednesfield (11 km).

Other products in Cannock

Passivhaus and EnerPHit in Cannock: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote