Passivhaus and EnerPHit · Powys
Passivhaus and EnerPHit windows in Brecon
If you live in Brecon (LD3) and want Passivhaus and EnerPHit windows, start with a free survey: every opening measured, then a written quote that fixes the price.
Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.
Winter light and glass choice in Brecon
On the shortest day, Brecon gets about 7 h 45 min of daylight and the midday sun reaches only about 15° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.
Guide prices in Brecon
| Guide | Supply and fit, inc VAT |
|---|---|
| uPVC low-energy window medium, deep frame, Uw about 0.8 or better | £1,395 – £1,795 |
| Timber low-energy window medium, thermally broken | £2,395 – £2,995 |
| Alu-clad timber low-energy window medium, certified-component systems on request | £2,695 – £3,395 |
Guide prices. Your written quote after the free survey fixes the price for the specification shown.
Rules for Passivhaus and EnerPHit in Wales
The rules for replacement windows in Wales are set by Approved Document L for Wales (2022 edition, with 2024 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. As in England, replacement windows are a controlled fitting: a competent person scheme installer self-certifies the work, or building control approves it.
Planning: Householder permitted development rules do not cover flats, and councils can remove rights with Article 4 directions. Listed buildings need listed building consent. Check with your council before changing the style or material.
How it works
You will know exactly what you are buying: the quote states the unit build-up, frame, finish, fitting work and how Building Regulations compliance is handled. On fitting day each opening is replaced and closed up before the team moves on.
- Free survey and a written quote fixed for the specification
- Glass build-up and whole-window U-value on every quote
- Written handover pack at the end of the job
- Guarantees on frames, units and fitting in writing
Questions from Brecon
Can you fit to my designer’s details?
Yes. We agree position, fixings and airtightness details with your designer before ordering.
Is triple glazing enough for Passivhaus?
Triple glass is the starting point. The frame, spacers and installation all have to perform too.
How long does it take to get Passivhaus and EnerPHit windows fitted in Brecon?
After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.
Do I need permission for Passivhaus and EnerPHit windows in Brecon?
In Wales, householder rules do not cover flats, councils can use Article 4 directions, and listed buildings need consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.
Nearby
Also near Brecon: Merthyr Tydfil (22 km), Ebbw Vale (22 km), Builth Wells (23 km) and Aberdare (26 km).
Other products in Brecon
- uPVC windows
- Aluminium windows
- Timber windows
- Alu-clad timber windows
- Casement windows
- Flush casement windows
- Tilt and turn windows
- Sash windows
- Bay and bow windows
- Fixed and picture windows
- Composite front doors
- French doors
- Sliding patio doors
- Bifold doors
- Glass-only replacement
- Acoustic triple glazing
- Security glazing
- Whole-house replacement
- New builds and self-builds
- Period homes and conservation areas
- Flats and apartments
Passivhaus and EnerPHit in Brecon: book your free survey
Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in Wales.