Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · North Yorkshire

Passivhaus and EnerPHit windows in Thornaby-on-Tees

Passivhaus and EnerPHit windows for homes in Thornaby-on-Tees: measured on a free survey, made to order and fitted by installation teams working for us across North Yorkshire.

TS17Postcode district
1.4U-value limit, England (W/m²K)
7h 16mDaylight, 21 Dec
12°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Thornaby-on-Tees

Winter days in Thornaby-on-Tees are short: about 7 h 16 min of daylight on 21 December, with the sun peaking near 12°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Thornaby-on-Tees

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

You will know exactly what you are buying: the quote states the unit build-up, frame, finish, fitting work and how Building Regulations compliance is handled. On fitting day each opening is replaced and closed up before the team moves on.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Thornaby-on-Tees

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Do Passivhaus windows have to be certified?

Not always, but certified components make the certification process simpler. Ask and we will price certified systems.

Do you fit Passivhaus and EnerPHit windows in Thornaby-on-Tees?

Yes. We arrange surveys and fitting in Thornaby-on-Tees and across North Yorkshire. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

How long does it take to get Passivhaus and EnerPHit windows fitted in Thornaby-on-Tees?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Nearby

We also cover nearby Stockton-on-Tees (4 km), Billingham (6 km), Middlesbrough (6 km) and Darlington (16 km).

Other products in Thornaby-on-Tees

Passivhaus and EnerPHit in Thornaby-on-Tees: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote