Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Norfolk

Passivhaus and EnerPHit windows in Thetford

Looking at Passivhaus and EnerPHit windows for a home in Thetford? We survey, quote and fit across Norfolk, and the IP24 postcode district is part of that.

IP24Postcode district
1.4U-value limit, England (W/m²K)
7h 40mDaylight, 21 Dec
14°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Low-energy triple glazed windows installed to your designer’s details. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Thetford

By midsummer Thetford has about 16 h 49 min of daylight, but in December only around 7 h 40 min, with the noon sun at about 14°. Triple glazing keeps more heat in during those long, dark months; big south and west windows may suit solar-control glass for summer.

Guide prices in Thetford

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Thetford

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

Do I need permission for Passivhaus and EnerPHit windows in Thetford?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Do you fit Passivhaus and EnerPHit windows in Thetford?

Yes. We arrange surveys and fitting in Thetford and across Norfolk. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

Nearby

We also cover nearby Bury St Edmunds (19 km), Newmarket (30 km), Stowmarket (30 km) and Dereham (32 km).

Other products in Thetford

Passivhaus and EnerPHit in Thetford: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote