Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Leicestershire

Passivhaus and EnerPHit windows in Melton Mowbray

Looking at Passivhaus and EnerPHit windows for a home in Melton Mowbray? We survey, quote and fit across Leicestershire, and the LE13 postcode district is part of that.

LE13Postcode district
1.4U-value limit, England (W/m²K)
7h 36mDaylight, 21 Dec
14°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

The windows and installation detail low-energy builds depend on. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Melton Mowbray

In Melton Mowbray, midday sun in late December sits around 14° high, with roughly 7 h 36 min of daylight. For windows facing north or shaded by neighbours, cutting heat loss matters more than solar gain; on open south-facing glass, ask about a higher solar-gain unit.

Guide prices in Melton Mowbray

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

England requires replacement windows to achieve 1.4 W/m²K, or a Window Energy Rating of band B or better, which good triple glazing passes comfortably. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Melton Mowbray

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Do Passivhaus windows have to be certified?

Not always, but certified components make the certification process simpler. Ask and we will price certified systems.

Do you fit Passivhaus and EnerPHit windows in Melton Mowbray?

Yes. We arrange surveys and fitting in Melton Mowbray and across Leicestershire. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

How long does it take to get Passivhaus and EnerPHit windows fitted in Melton Mowbray?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Nearby

Nearby towns on our list include Wymondham (10 km), Oakham (15 km), Loughborough (21 km) and Leicester (22 km).

Other products in Melton Mowbray

Passivhaus and EnerPHit in Melton Mowbray: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote