Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Highlands and Islands

Passivhaus and EnerPHit windows in Thurso

We take enquiries for Passivhaus and EnerPHit windows in Thurso. Because KW14 is a remote or island district, surveys and fitting are by arrangement, with travel costs agreed before you commit.

KW14Postcode district
1.6U-value limit, Scotland (W/m²K)
6h 17mDaylight, 21 Dec
8°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Low-energy triple glazed windows installed to your designer’s details. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Thurso

On the shortest day, Thurso gets about 6 h 17 min of daylight and the midday sun reaches only about 8° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.

Guide prices in Thurso

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices are the same UK-wide; for island and remote districts, travel and access costs are added and shown separately on your quote. Your written quote fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in Scotland

The rules for replacement windows in Scotland are set by the Building Standards Technical Handbook (Domestic), section 6: 1.6 W/m²K. Replacing a window or door, frame and all, does not need a building warrant, but the work must still meet the building standards.

Planning: Since May 2024, replacement windows on houses are widely permitted development, including in many conservation areas, with front elevations expected to match the existing closely; your council tells you if prior notification applies. Flats outside conservation areas generally need permission only if the opening size changes. Listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Every opening measured, including escape and vent needs
  • Frames rated for the weight of triple glass
  • Old windows removed and taken away
  • Each opening closed up the same day

Questions from Thurso

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Do you fit Passivhaus and EnerPHit windows in Thurso?

By arrangement. Thurso (KW14) is a remote or island district, so we confirm availability before booking a survey and show any travel or access costs separately on your quote.

Do I need permission for Passivhaus and EnerPHit windows in Thurso?

In Scotland, replacement windows on houses are widely permitted development since May 2024, with front elevations expected to match closely; listed buildings need consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Nearby

Nearest towns on our list: Wick (30 km), Kirkwall (54 km), Lossiemouth (98 km) and Elgin (106 km).

Other products in Thurso

Passivhaus and EnerPHit in Thurso: ask about a survey

Written quote fixed for the specification, with travel and access costs shown separately. No building warrant is needed for a straight replacement in Scotland; we fit to the building standards and give you a written handover pack.

CallGet a quote