Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Greater Manchester

Passivhaus and EnerPHit windows in Ashton-in-Makerfield

Homes in Ashton-in-Makerfield can have Passivhaus and EnerPHit windows supplied and fitted, with surveys arranged across Greater Manchester including WN4.

WN4Postcode district
1.4U-value limit, England (W/m²K)
7h 28mDaylight, 21 Dec
13°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

The windows and installation detail low-energy builds depend on. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Ashton-in-Makerfield

In Ashton-in-Makerfield, midday sun in late December sits around 13° high, with roughly 7 h 28 min of daylight. For windows facing north or shaded by neighbours, cutting heat loss matters more than solar gain; on open south-facing glass, ask about a higher solar-gain unit.

Guide prices in Ashton-in-Makerfield

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Every opening measured, including escape and vent needs
  • Frames rated for the weight of triple glass
  • Old windows removed and taken away
  • Each opening closed up the same day

Questions from Ashton-in-Makerfield

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

Do you fit Passivhaus and EnerPHit windows in Ashton-in-Makerfield?

Yes. We arrange surveys and fitting in Ashton-in-Makerfield and across Greater Manchester. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

How long does it take to get Passivhaus and EnerPHit windows fitted in Ashton-in-Makerfield?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Nearby

Nearby towns on our list include Golborne (4 km), Newton-le-Willows (5 km), St Helens (7 km) and Wigan (7 km).

Other products in Ashton-in-Makerfield

Passivhaus and EnerPHit in Ashton-in-Makerfield: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote