Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Greater London

Passivhaus and EnerPHit windows in Sutton

Passivhaus and EnerPHit windows for homes in Sutton: measured on a free survey, made to order and fitted by installation teams working for us across Greater London.

SM1Postcode district
1.4U-value limit, England (W/m²K)
7h 51mDaylight, 21 Dec
15°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Low-energy triple glazed windows installed to your designer’s details. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Sutton

On the shortest day, Sutton gets about 7 h 51 min of daylight and the midday sun reaches only about 15° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.

Guide prices in Sutton

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.

  • Every opening measured, including escape and vent needs
  • Frames rated for the weight of triple glass
  • Old windows removed and taken away
  • Each opening closed up the same day

Questions from Sutton

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

How long does it take to get Passivhaus and EnerPHit windows fitted in Sutton?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Do I need permission for Passivhaus and EnerPHit windows in Sutton?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Nearby

Nearby towns on our list include Carshalton (3 km), Banstead (3 km), Ewell (3 km) and Wallington (4 km).

Other products in Sutton

Passivhaus and EnerPHit in Sutton: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote