Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Edinburgh and the Lothians

Passivhaus and EnerPHit windows in Livingston

Passivhaus and EnerPHit windows for homes in Livingston: measured on a free survey, made to order and fitted by installation teams working for us across Edinburgh and the Lothians.

EH54Postcode district
1.6U-value limit, Scotland (W/m²K)
6h 58mDaylight, 21 Dec
11°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Livingston

Winter days in Livingston are short: about 6 h 58 min of daylight on 21 December, with the sun peaking near 11°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Livingston

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in Scotland

The rules for replacement windows in Scotland are set by the Building Standards Technical Handbook (Domestic), section 6: 1.6 W/m²K. Replacing a window or door, frame and all, does not need a building warrant, but the work must still meet the building standards.

Planning: Since May 2024, replacement windows on houses are widely permitted development, including in many conservation areas, with front elevations expected to match the existing closely; your council tells you if prior notification applies. Flats outside conservation areas generally need permission only if the opening size changes. Listed buildings need listed building consent.

How it works

We start with a survey, not a sales pitch: measurements, the structure above any bays, trickle-vent needs and escape windows. The quote that follows fixes the price, and anything unexpected on the day is agreed with you first.

  • Guide prices published, not hidden
  • No pressure: the quote is yours to keep
  • Frames, glass and fitting in one contract
  • Advice on planning and consents before you order

Questions from Livingston

What is EnerPHit?

The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.

Can you fit to my designer’s details?

Yes. We agree position, fixings and airtightness details with your designer before ordering.

Do I need permission for Passivhaus and EnerPHit windows in Livingston?

In Scotland, replacement windows on houses are widely permitted development since May 2024, with front elevations expected to match closely; listed buildings need consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

Do you fit Passivhaus and EnerPHit windows in Livingston?

Yes. We arrange surveys and fitting in Livingston and across Edinburgh and the Lothians. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

Nearby

Also near Livingston: Bathgate (8 km), Grangemouth (17 km), Dunfermline (19 km) and Falkirk (20 km).

Other products in Livingston

Passivhaus and EnerPHit in Livingston: book your free survey

Written quote fixed for the specification, after a free survey. No building warrant is needed for a straight replacement in Scotland; we fit to the building standards and give you a written handover pack.

CallGet a quote