Passivhaus and EnerPHit · Dorset
Passivhaus and EnerPHit windows in Ferndown
We arrange surveys and fitting of Passivhaus and EnerPHit windows in Ferndown and the BH22 area, with a written, fixed quote after a free survey.
Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.
Winter light and glass choice in Ferndown
On the shortest day, Ferndown gets about 7 h 56 min of daylight and the midday sun reaches only about 16° above the horizon. Low winter sun means north-facing rooms here gain little solar heat, which is where triple glazing’s lower heat loss helps most.
Guide prices in Ferndown
| Guide | Supply and fit, inc VAT |
|---|---|
| uPVC low-energy window medium, deep frame, Uw about 0.8 or better | £1,395 – £1,795 |
| Timber low-energy window medium, thermally broken | £2,395 – £2,995 |
| Alu-clad timber low-energy window medium, certified-component systems on request | £2,695 – £3,395 |
Guide prices. Your written quote after the free survey fixes the price for the specification shown.
Rules for Passivhaus and EnerPHit in England
The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.
Planning: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.
How it works
After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.
- Every opening measured, including escape and vent needs
- Frames rated for the weight of triple glass
- Old windows removed and taken away
- Each opening closed up the same day
Questions from Ferndown
What is EnerPHit?
The Passive House Institute’s standard for retrofitting existing buildings, with slightly relaxed targets compared with new Passivhaus builds.
Do Passivhaus windows have to be certified?
Not always, but certified components make the certification process simpler. Ask and we will price certified systems.
Do you fit Passivhaus and EnerPHit windows in Ferndown?
Yes. We arrange surveys and fitting in Ferndown and across Dorset. Send your postcode and the windows or doors you want replaced, and we will book a free survey.
How long does it take to get Passivhaus and EnerPHit windows fitted in Ferndown?
After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.
Nearby
We also cover nearby Wimborne Minster (6 km), Bournemouth (10 km), Christchurch (12 km) and Poole (12 km).
Other products in Ferndown
- uPVC windows
- Aluminium windows
- Timber windows
- Alu-clad timber windows
- Casement windows
- Flush casement windows
- Tilt and turn windows
- Sash windows
- Bay and bow windows
- Fixed and picture windows
- Composite front doors
- French doors
- Sliding patio doors
- Bifold doors
- Glass-only replacement
- Acoustic triple glazing
- Security glazing
- Whole-house replacement
- New builds and self-builds
- Period homes and conservation areas
- Flats and apartments
Passivhaus and EnerPHit in Ferndown: book your free survey
Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.