Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Passivhaus and EnerPHit · Cheshire

Passivhaus and EnerPHit windows in Crewe

If you live in Crewe (CW1) and want Passivhaus and EnerPHit windows, start with a free survey: every opening measured, then a written quote that fixes the price.

CW1Postcode district
1.4U-value limit, England (W/m²K)
7h 32mDaylight, 21 Dec
14°Midday sun, 21 Dec
Timber-clad low-energy house with deep-set windows and external shading

Certified-component systems on request, with data for PHPP. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.

Winter light and glass choice in Crewe

Winter days in Crewe are short: about 7 h 32 min of daylight on 21 December, with the sun peaking near 14°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Crewe

GuideSupply and fit, inc VAT
uPVC low-energy window
medium, deep frame, Uw about 0.8 or better
£1,395 – £1,795
Timber low-energy window
medium, thermally broken
£2,395 – £2,995
Alu-clad timber low-energy window
medium, certified-component systems on request
£2,695 – £3,395

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for Passivhaus and EnerPHit in England

In England, replacement windows must meet 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.

Planning: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.

How it works

We start with a survey, not a sales pitch: measurements, the structure above any bays, trickle-vent needs and escape windows. The quote that follows fixes the price, and anything unexpected on the day is agreed with you first.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Crewe

Do Passivhaus windows have to be certified?

Not always, but certified components make the certification process simpler. Ask and we will price certified systems.

Is triple glazing enough for Passivhaus?

Triple glass is the starting point. The frame, spacers and installation all have to perform too.

Do I need permission for Passivhaus and EnerPHit windows in Crewe?

In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.

How long does it take to get Passivhaus and EnerPHit windows fitted in Crewe?

After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.

Nearby

Nearby towns on our list include Winsford (12 km), Kidsgrove (14 km), Congleton (17 km) and Newcastle-under-Lyme (18 km).

Other products in Crewe

Passivhaus and EnerPHit in Crewe: book your free survey

Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.

CallGet a quote