Passivhaus and EnerPHit · Buckinghamshire
Passivhaus and EnerPHit windows in Amersham
Passivhaus and EnerPHit windows for homes in Amersham: measured on a free survey, made to order and fitted by installation teams working for us across Buckinghamshire.
Low-energy triple glazed windows installed to your designer’s details. Passivhaus is a building standard from the Passive House Institute; EnerPHit is its version for retrofits.
Winter light and glass choice in Amersham
Winter days in Amersham are short: about 7 h 48 min of daylight on 21 December, with the sun peaking near 15°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.
Guide prices in Amersham
| Guide | Supply and fit, inc VAT |
|---|---|
| uPVC low-energy window medium, deep frame, Uw about 0.8 or better | £1,395 – £1,795 |
| Timber low-energy window medium, thermally broken | £2,395 – £2,995 |
| Alu-clad timber low-energy window medium, certified-component systems on request | £2,695 – £3,395 |
Guide prices. Your written quote after the free survey fixes the price for the specification shown.
Rules for Passivhaus and EnerPHit in England
The rules for replacement windows in England are set by Approved Document L (2021 edition, with 2023 amendments): 1.4 W/m²K, or a Window Energy Rating of band B or better. Replacement windows are a controlled fitting. A competent person scheme installer (such as FENSA or Certass) self-certifies the work and notifies the council within 30 days; otherwise a building control body approves it.
Before ordering: Replacing windows on a house is normally permitted development if the new ones look similar. New upper-floor windows in a side wall must be obscure glazed and fixed, or open only above 1.7 m. Flats and maisonettes have no householder permitted development rights, so a change that alters their appearance needs planning permission. An Article 4 direction in a conservation area may mean permission is needed, and listed buildings need listed building consent.
How it works
After the free survey you get a written quote naming the frame system, the glass build-up and the whole-window U-value for every item. Windows are made to order, then fitted, sealed and made good, one opening at a time.
- Guide prices published, not hidden
- No pressure: the quote is yours to keep
- Frames, glass and fitting in one contract
- Advice on planning and consents before you order
Questions from Amersham
Can you fit to my designer’s details?
Yes. We agree position, fixings and airtightness details with your designer before ordering.
Do Passivhaus windows have to be certified?
Not always, but certified components make the certification process simpler. Ask and we will price certified systems.
How long does it take to get Passivhaus and EnerPHit windows fitted in Amersham?
After the survey, typical manufacture time is 8 to 14 weeks, and most homes are fitted in 1 to 4 days.
Do I need permission for Passivhaus and EnerPHit windows in Amersham?
In England, like-for-like replacements on a house are normally permitted development; flats need permission if the change alters their appearance, Article 4 areas may need permission, and listed buildings need listed building consent. Check whether your street is in a conservation area or covered by an Article 4 direction before changing the style.
Nearby
Also near Amersham: Chesham (4 km), Chalfont St Peter (8 km), Gerrards Cross (10 km) and High Wycombe (10 km).
Other products in Amersham
- uPVC windows
- Aluminium windows
- Timber windows
- Alu-clad timber windows
- Casement windows
- Flush casement windows
- Tilt and turn windows
- Sash windows
- Bay and bow windows
- Fixed and picture windows
- Composite front doors
- French doors
- Sliding patio doors
- Bifold doors
- Glass-only replacement
- Acoustic triple glazing
- Security glazing
- Whole-house replacement
- New builds and self-builds
- Period homes and conservation areas
- Flats and apartments
Passivhaus and EnerPHit in Amersham: book your free survey
Written quote fixed for the specification, after a free survey. Building Regulations sign-off by a competent person scheme installer or building control, as the law requires in England.