Supplied and fitted across the UKFree surveyWritten fixed quoteGuide prices published0800 088 6248

Flush casement windows · Edinburgh and the Lothians

Triple glazed flush casement windows in Bathgate

Looking at triple glazed flush casement windows for a home in Bathgate? We survey, quote and fit across Edinburgh and the Lothians, and the EH48 postcode district is part of that.

EH48Postcode district
1.6U-value limit, Scotland (W/m²K)
6h 58mDaylight, 21 Dec
11°Midday sun, 21 Dec
Sage green flush casement windows on a whitewashed English cottage

A softer, flatter face for cottages and older homes. A flush casement window has sashes that close flush with the outer frame instead of overlapping it, copying the look of traditional timber windows.

Winter light and glass choice in Bathgate

Winter days in Bathgate are short: about 6 h 58 min of daylight on 21 December, with the sun peaking near 11°. That low angle reaches deep into south-facing rooms, so we match the glass to each elevation rather than using one spec for the whole house.

Guide prices in Bathgate

GuideSupply and fit, inc VAT
Small window
about 600 x 1000 mm (bathroom, landing)
£845 – £1,095
Medium window
about 1200 x 1200 mm (bedroom)
£1,195 – £1,495
Large window
about 1800 x 1200 mm (lounge)
£1,795 – £2,195

Guide prices. Your written quote after the free survey fixes the price for the specification shown.

Rules for flush casement windows in Scotland

The rules for replacement windows in Scotland are set by the Building Standards Technical Handbook (Domestic), section 6: 1.6 W/m²K. Replacing a window or door, frame and all, does not need a building warrant, but the work must still meet the building standards.

Before ordering: Since May 2024, replacement windows on houses are widely permitted development, including in many conservation areas, with front elevations expected to match the existing closely; your council tells you if prior notification applies. Flats outside conservation areas generally need permission only if the opening size changes. Listed buildings need listed building consent.

How it works

The surveyor measures every opening, checks ventilation, escape windows and safety-glass zones, and talks through styles. Your written quote lists each item with its glass build-up and U-value, and the price is fixed for that specification.

  • Free survey and a written quote fixed for the specification
  • Glass build-up and whole-window U-value on every quote
  • Written handover pack at the end of the job
  • Guarantees on frames, units and fitting in writing

Questions from Bathgate

Are flush casements more expensive?

Yes. Our guide puts them about 30% above a standard uPVC casement of the same size.

Will they be accepted in a conservation area?

Flush designs are often the closest match to original timber windows, but each council decides. See our conservation guide and check any Article 4 direction.

How long does it take to get triple glazed flush casement windows fitted in Bathgate?

After the survey, typical manufacture time is 5 to 8 weeks, and most homes are fitted in 1 to 4 days.

Do you fit triple glazed flush casement windows in Bathgate?

Yes. We arrange surveys and fitting in Bathgate and across Edinburgh and the Lothians. Send your postcode and the windows or doors you want replaced, and we will book a free survey.

Nearby

We also cover nearby Livingston (8 km), Grangemouth (13 km), Falkirk (14 km) and Airdrie (21 km).

Other products in Bathgate

Flush casement windows in Bathgate: book your free survey

Written quote fixed for the specification, after a free survey. No building warrant is needed for a straight replacement in Scotland; we fit to the building standards and give you a written handover pack.

CallGet a quote